Redundant Audio Mode
Use Redundant mode to carry a backup copy of the Dante audio on the Secondary network in case the audio on the primary
network is interrupted.
Network Characteristics:
•
Dante Primary Audio and Shure Control are present on the Primary port
•
Backup Dante audio is present on the Secondary port
•
The Primary Dante IP address and the Shure Control IP address must be on the same subnet. The computer running
WWB6 must also be on this subnet.
•
The Secondary Dante IP Address must be set to a different subnet
Note: Devices connected to the Redundant network must be compatible with Redundant audio.
Network Example
① Computer
Connect the computer running the Dante controller and WWB6 to the Primary port.
② DHCP Server
Can be configured with or without a DHCP server. Do not route audio through the server.
③ Gigabit Ethernet Switches
◦
Use dedicated switches for the Primary and Secondary networks
Shure Incorporated
40/70