Shure ULX-D Quad Manual page 21

Configures the transmitter power switch to act as an audio mute switch.
Cust. Group
Create Custom Groups of up to 6 frequencies and export to networked receivers
GOOSENECK / BOUNDARY
HIGH PASS
Attenuates frequencies below 150 Hz by 12 dB per octave: KEEP, OFF, ON
RF POWER
Sets the transmitter RF power level: KEEP, 10mW=Nm, 1mW=Lo, 20mW=Hi
BATTERY
Sets the transmitter battery type to ensure accurate metering: KEEP, Alkaline, NiMH, Lithium
BN OFFSET
Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments
GN OFFSET
Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments
POWER LOCK
Locks the transmitter's power button: KEEP, OFF, ON
Cust. Group
Create Custom Groups of up to 6 frequencies and export to networked receivers
INITIAL STATE FROM CHARGER
Choose the transmitter's state after it is removed from a charger: KEEP, Active, Muted, OFF
MUTE BUTTON BEHAVIOR
Sets the mute button behavior: KEEP, Toggle, Push-to-Talk, Push-to-Mute, Disabled
BN MUTE LED ACTIVE/MUTE
Sets the mute LED colors for active and muted states: KEEP, Green/Red, Red/OFF, Red/Flash-Red, OFF/OFF
GN MUTE LED ACTIVE/MUTE
Sets the mute LED colors for active and muted states: KEEP, Green/Red, Red/OFF, Red/Flash-Red, OFF/OFF
MUTE LED LIGHT BRIGHTNESS
Sets the mute LED brightness: KEEP, Normal, Low
BATTERY INFO
HEALTH
Shure Incorporated
21/70