Fan Installation; Fan Settings - Xpelair VX100 User Manual

Installing switches and cables
Wet Rooms: on/o switch must be
!
situated so that it cannot be touched
by persons making use of the bath or shower.
A means for disconnection in all poles must be
!
incorporated in the fixed wiring in accordance
with wiring regulations.
Step 1
Step 2
location (in the wall or above the ceiling).
Step 3
Step 4
Step 5
Step 6
switch to the point of connection to
Warning: Do not make any connections
!
to the electrical supply at this stage.
Step 7
Make all connections within the isolating
08

Fan installation

Step 1 – Preparing the fan
D
for installation
the electrical cover.
If working above ground floor level, safety
!
precautions must be observed.
If installing in a ceiling, appropriate
!
termination ancillaries are required
Step 2 – Mount the fan body
E
G
Step 3 – Wire the electrical
H
connections
see I.
I

Fan settings

VX100T / VX120T / VX150T
J
VX100 / VX120 / VX150
Finally refit the electrical cover 'O' ring seals
(where applicable) and screw in place.
see F.
see J. For location of
see K.