Siemens LDS 6 Compact Operating Instructions page 41

In situ laser gas analyzers, continuous gas analysis & optics housing

Hide thumbs Also See for LDS 6:

Table of Contents

Ex transmitter and receiver optics housings

A hybrid cable is used to connect the transmitter optics housing to the barrier box.

Connecting transmitter optics housing to barrier box

1. Cut off the fitted connector from the end of the hybrid cable at the barrier side.

2. Insert the hybrid cables (one for each channel) through the openings at the top of the barrier

box. Fasten each cable with a gasket.

LDS 6 & Optics housing CD 6 Compact Operating Instructions

Compact Operating Instructions, 12/2022, A5E03314905-AB

4.2 Connecting the LDS 6, optics housing CD 6

Electric connections

Table of Contents

Cd 6 7mb6121 7mb6122