Nikon D2H User Manual page 216

Menus and Playback
This option controls the functions performed
by the command dials during playback or when
menus are displayed. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.
Option
Off Multi selector used to choose picture displayed, highlight thumbnails, and
(default) navigate menus.
Main command dial performs same function as pressing multi selector
left or right. Sub-command dial performs same function as pressing multi
selector up or down.
• Single-image playback: main command dial is used to choose picture
displayed, sub-command dial to display additional photo information.
• Thumbnail playback: main command dial moves cursor left or right, sub-
On
command dial moves cursor up or down.
• Menu navigation: main command dial moves highlight bar up or down.
Rotate sub-command dial to right to display sub-menu, to left to return
to previous menu. To make selection, press multi selector to right, press
center of multi selector, or press
Custom Setting f6: Buttons and Dials
Normally, changes to settings that involve both a
command dial and a button are made by rotating
the command dial while the button is held down.
If desired, this can be changed so that the buttons
do not have to be held down while the command
dial is rotated.
204
f5 Customize command dials
Description
button.
f6 Setting method for
CSM MENU
Menus and Playback
Off
On
CSM MENU
buttons and dials
Default
Hold
OK
OK