Nikon D2H User Manual page 73

Selecting a White Balance Preset
To set white balance to a preset value:
1
Highlight White bal. preset in the white
balance menu (
lector to the right. The menu shown at right
will be displayed. (To return to the shooting
menu, press the
2
Presets are identifi ed by an icon or thumbnail,
a name (d-0 – d-4), and a comment. Press the
multi selector up, down, left, or right to high-
light the desired preset. To select the high-
lighted preset and return to shooting mode
without completing steps 3–5, press the
button.
3
Press the center of the multi selector to display
the menu shown at right. To view options for
other presets, highlight the name of the cur-
rent preset (d-0 – d-4) and press the multi
selector right.
Selecting a White Balance Preset: the WB Button
At a setting of
be selected by pressing the WB button and rotating the
sub-command dial. The current preset is displayed in
the rear control panel while the WB button is pressed.
52) and press the multi se-
button.)
(White bal. preset), presets can also
SHOOTING MENU
Select Set
d-0 d-1
d-3
d - 0 :
SHOOTING MENU
Select Set
d-0 d-1
d-3
d - 1 :
SHOOTING MENU
White bal.
White bal. preset
d - 1
Set
Edit comment
Select image
Copy d-0
d d d d d d d d d d d d-2
d d -4 d d 4 4 d d -4 d d 4 4 d 4 d-4 d-4 d-4 d-4 d-4
d-2 d d d d d d d d d d d
d d -4 d d -4 d d 4 4 d 4 d d 4 4 d-4 d-4 d-4 d-4 d-4
OK
61