Custom Settings - Nikon D2H User Manual

Custom Settings

Custom settings are used to fi ne-tune a variety of camera settings to suit the
user's pref er enc es, creating combinations of settings that differ from the fac-
tory defaults in effect at the time your cam era was purchased. In addition to
Custom Settings C (Bank select) and R (Menu reset), settings in the CSM
(Custom Settings) menu are divided into the following six groups:
CSM MENU
C Bank select
R Menu reset
a Autofocus
b Metering/Exposure
c Timers/AE&AF Lock
d Shooting/Display
e Bracketing/Flash
f Controls
Press the multi selector up or down to highlight
the desired group and then press the multi se-
lector to the right. The full list of Custom Set-
tings a1–f7 will be displayed, starting with the
settings in the selected group. To select a setting
in a different group, press the multi selector up or
down scroll until the desired setting is displayed,
or press the multi selector to the left to return the
top menu and select a different group. Custom Setting a1 (AF-C mode pri-
ority) and f7 (No CF card?) are linked: pressing the multi selector up when
Custom Setting a1 is highlighted displays Custom Setting f7, while pressing
the multi selector down while Custom Setting f7 is highlighted displays Cus-
tom Setting a1.
Using the Multi Selector
The multi selector can be used at any time when the monitor is on. The focus selector
lock switch only takes effect when the monitor is off.
170
Group
A
a Autofocus
b Metering/Exposure
c Timers/AE&AF Lock
d Shooting/Display
e Bracketing/Flash
f Controls
Fine-Tuning Camera Settings
Custom Settings
b1–b6
d1–d7
CSM MENU
a1 AF-C mode priority
a2 AF-S mode priority
a3 Group dynamic AF
a4 Disable Lock-On
a5 AF activation
a6 Focus area Illum
a7 Focus area
a8 Vertical AF-ON
a1–a8
c1–c5
e1–e8
f1–f7
ON
ON
OFF