Nikon D2H User Manual page 134

Hide thumbs Also See for D2H:
Table of Contents

Advertisement

Interrupting Interval Timer Photography
To interrupt interval timer photography:
1
Press the multi selector left or right to highlight Start at the bottom of
the interval timer menu (see opposite).
2
Press the multi selector up or down to select Done and press the
ton.
Interval timer photography will also be interrupted if:
• A two button reset is performed (
• Another shooting bank is selected (
• Reset shooting menu is selected in the shooting menu (
• Bracketing settings are changed (
• The battery is exhausted.
• The clock battery is exhausted.
• The camera is connected to a computer.
Normal shooting will resume when interval timer photography ends.
Shooting Mode
Regardless of the shooting mode selected, the camera will take the specifi ed number
of shots at each interval. In C
taken at a rate of eight shots per second. In S (single frame), C
speed), and M-
(mirror up) modes, photographs will be taken at the rate chosen for
UP
Custom Setting d1 (Shooting speed;
release delay applies to each photograph taken.
In M-
mode, the mirror will be raised automatically immediately before each shot. If
UP
the shutter-release button is pressed between photographs, the mirror will be raised
and will remain raised until the next photograph is taken.
Shooting Menu Banks
Changes to interval timer settings apply to all shooting menu banks (
ing menu settings are reset using the Reset shooting menu item in the shooting
menu (
164), interval timer settings will be reset as follows:
• Start time: Now
• Interval: 00:01´:00˝
• Number of intervals: 1
• Number of shots: 1
• Start: Off
122
128).
162).
98).
(continuous high speed) mode, photographs will be
H
188). In
164).
(continuous low-
L
(self-timer) mode, the shutter-
162). If shoot-
but-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents