Lcd Brightness; Mirror Lock-Up - Nikon D2H User Manual

LCD Brightness

To adjust monitor brightness, highlight LCD
brightness in the setup menu (
the multi selector to the right. The menu shown
at right will be displayed. Press the multi selector
up to increase brightness, down to decrease. The
num ber to the right of the dis play indicates the
cur rent bright ness level, with +2 the brightest set-
ting and –2 the darkest. Press the multi selector
to the right to complete the operation and return
to the set up menu.

Mirror Lock-up

This option is used to lock the mirror in the up po-
sition to allow inspection or cleaning of the low-
pass fi lter that protects the LBCAST image sensor.
See "Technical Notes: Caring for the Camera and
Battery" ( 240).
Highlight Mirror lock-up in the setup menu (
selector to the right. Press the multi selector up or down to highlight an op-
tion, then press to the right to make a selection.
Option
OFF Mirror functions normally.
When shutter is released, mirror is locked in up position and blink-
ing "– – – – – – " is displayed in top control panel. Mirror will
Image sensor
return to down position when camera is turned off. To ensure
cleaning
power is available to lower mirror, this option is only available when
camera is powered by EH-6 AC adapter.
208
206) and press
206) and press the multi
Description
SET UP
LCD brightness
SET UP
Mirror lock-up
OFF
OFF
ON Image sensor cleaning
OK
0
OK