Troubleshooting - Electrolux ENG7TD18S User Manual

Replacing the CleanAir+ filter
1. Open the plastic housing.
2. Pull out the used air filter.
3. Unpack the new air filter from the
plastic bag and insert it in the drawer.
4. Close the plastic housing.

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
The appliance does not
operate.
1
2
Possible cause
The appliance is switched
off.
5. After the filter replacement, press the
Filter Reset alarm button on the
control panel to turn off the alert.
For best performance, place the plastic
housing in the proper location (to the left
of the glass shelf) and replace the
CleanAir+ filter every 6 months (refer to
"Air filter change indicator").
The air filter is a consumable
accessory and as such is not
covered by the guarantee.
You can purchase new air
filters from your local dealer.
7.6 Period of non-operation
When the appliance is not in use for long
period, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Clean the appliance and all
accessories.
4. Leave the doors open to prevent
unpleasant smells.
Solution
Switch on the appliance.
ENGLISH 21