Troubleshooting - Electrolux LYB3NE82R User Manual

Table of Contents

Advertisement

it is in operation, neither on the internal walls,
nor on the foods.
7.4 Cleaning the air channels
1. Remove the plinth (A), then the
ventilation grid (B).

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
The appliance does not operate.
The appliance is noisy.
Acoustic or visual alarm is on.
The compressor operates continual‐
ly.
C
B
A
Possible cause
The appliance is switched off.
The mains plug is not connected to
the mains socket correctly.
There is no voltage in the mains
socket.
The appliance is not supported
properly.
The cabinet has been recently
switched on.
The temperature in the appliance is
too high.
The door is left open.
Temperature is set incorrectly.
2. Clean the ventilation grid.
3. Carefully pull the air deflector out (C),
checking that there is no water left from
the defrosting.
4. Clean the lower part of the appliance with
a vacuum cleaner.
7.5 Period of non-operation
When the appliance is not in use for long
period, take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door open to prevent
unpleasant smells.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical appli‐
ance to the mains socket. Contact a
qualified electrician.
Check if the appliance stands sta‐
ble.
Refer to "High temperature alarm"
or "Door open alarm".
Refer to "High temperature alarm"
or "Door open alarm".
Close the door.
Refer to "Control panel" chapter.
ENGLISH
13

Advertisement

Table of Contents
loading

Table of Contents