System - Gigaset CL390A Duo Manual

System

Changing the system PIN
¤
Menu Settings
current 4-digit system PIN (default: 0000)
Resetting the system PIN
Resetting the base to the original PIN code 0000:
¤
Remove the power cable from the base
base At the same time, reconnect the power cable to the base
at least 5 seconds . . . The base is reset and the system PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are reset to the
defaults.
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the handset's registra-
tion to the base, are maintained.
¤
Menu Settings
factory reset?
Resetting the base
A reset disables mode No Radiation, resets individual settings and deletes all lists.
The system PIN is reset to the original code 0000.
The time and date are not affected. The answer machine (if available) is not ready until after
about 15 seconds after the base is reset.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
¤
Menu Settings
Resetting the base using a key on the base
All handsets are de-registered. The system PIN is set back to the original code 0000.
¤
Remove the power cable from the base
base At the same time, reconnect the power cable to the base
for at least another 5 seconds
OK System
OK System
OK
OK System
OK System PIN
OK Enter the new 4-digit system PIN
Keep pressed the Registration/paging key on the
OK Reset Handset
OK Reset Base
Keep pressed the Registration/paging key on the
Phone settings
OK Enter the
Press and hold the key for
OK . . . Perform
OK . . . Reset?
Keep the key pressed
OK
OK
39