Connecting Of Video-Sources - Gazer MIB-4 Manual

2.5. Connecting video sources
It is possible to connect an after-market rear-view camera, an after-market front camera and
an AV source to the video-interface.
Before a final installation of the peripheral devices, we recommend a test-run to ensure
the compatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there's always a possibility of incompatibility.
Note: The interface cable's grey coloured IR cable and the audio switch cable are out of
function and should be isolated.
Connect the female 20pin connector of the interface cable to the male 20pin
connector of the video-interface.
Connect the video RCA of the Front camera to the female RCA connector "Video IN1"
of the 20pin interface cable.
Connect the video RCA of the Rear-view camera to the female RCA connector
"camera IN" of the 20pin interface cable (refer also to chapter "Video signal
connection of the rear-view camera")
Connect the video RCA of the AV source to the female RCA connector "Video IN 2" of
the 20pin interface cable.
Version 17.11.2017
All manuals and user guides at all-guides.com
HW:CAM(V82)GD RL3-MIB-4