Installing The Light Kit - Home Decorators Collection MARLON Use And Care Manual

Assembly — Installing the Light Kit
Attaching the light kit mounting
9
plate to the mounting ring
□
Remove one of the three light kit mounting plate
screws (PP) from the mounting ring (QQ) and loosen
the other two screws. (Do not remove.)
□
Place the key holes in the light kit mounting plate (I)
over the two screws (PP) previously loosened from
the mounting ring (QQ). Turn the light kit mounting
plate (I) until the light kit mounting plate (I) locks in
place at the narrow section of the key holes.
□
Securely tighten the two light kit mounting plate
screws (PP) previously loosened and the one (PP)
previously removed.
QQ
I
PP
Attaching the LED light kit
10
and glass shade
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Remove one of the three light kit mounting screws
(RR) from the light kit mounting plate (I) and loosen
the other two screws (RR). (Do not remove.)
□
While holding the 25W LED light kit (J) under your fan
motor assembly (F), make the 2-pin wire connections:
- White to white
- Black to black
□
Place the key holes in the 25W LED light kit (J) over
the two mounting screws (RR) previously loosened
from the light kit mounting plate (I). Turn the 25W
LED light kit (J) until the 25W LED light kit locks in
place at the narrow section of the key holes. Secure
by tightening the two light kit mounting screws (RR)
previously loosened and the one (RR) previously
removed.
□
Position the notches (SS) in the outer rim of the glass
shade (K) so they line up with the tabs (TT) on the
inside of the rim on the 25W LED light kit (J).
Carefully lift the glass (K) up inside the 25W LED light
kit (J) and secure it to the fan by turning the glass
shade (K) clockwise until snug. DO NOT OVERTIGHTEN.
I
TT
SS
13
Please contact 1-800-986-3460 for further assistance.
F
J
RR
K
HOMEDEPOT.COM/HOMEDECORATORS