Table of Contents
Advertisement
3
Application and Deployment
3.5
CDL Rigging Extension Bar Installation Instructions
3.5
CDL Rigging Extension Bar Installation Instructions
8
The CDL Rigging Extension Bar is an optional accessory for the
Rigging Grid that provides upward or downward tilt control
for any suspended installation that requires it.
IIMPORTANT: Use only the rigging grid labeled for your
model of CDL loudspeakers (CDL12P or CDL10P).
1.
Align the CDL Rigging Extension Bar with the center support of the
CDL Rigging Grid. For downward tilt, the bar should be mounted at the rear
of the loudspeaker array. For upward tilt, the bar should be mounted at the
front of the array. The illustrations in this section show the downward tilt
configuration only.
2.
Insert the first clevis pin into the outermost through-hole.
3.
Lock the clevis pin in place using a cotter pin.
4.
Insert the second clevis pin into the inner through-hole.
5.
Insert a cotter pin into second clevis pin to lock it into place.
CDL12P / CDL 10P
Owner's Manual
Advertisement
Table of Contents
