Table of Contents
Advertisement
TROUBLESHOOTING
6.
Make sure every device is powered on.
Wait for 20 seconds after each step to verify if it runs correctly.
Table 5: Troubleshooting for Baby Monitor
Questions
Disconnect
(1) Take the monitor and move closer to the camera
to reconnect them.
(2) Press and hold the Power button for 3 seconds.
Follow the instructions to press "OK" to turn off the
monitor. Then, press and hold the Power button
again to restart it.
(3) Unplug and re-plug the camera's power adapter.
(4) Re-Pair the camera
On the Monitor:
Press the M button to enter the menu > Navigate to
Camera management > Select "+" > OK to add a
camera.
On the Camera:
Press the "PAIR" button located under the camera
within 30 seconds.
Page 39 / Total 45
Solution steps
Advertisement
Table of Contents
