Table of Contents
Advertisement
You can choose between Celsius or Fahrenheit temperature units.
9) Language:
You can your language. The early version just support English.
10) Monitor default settings:
You can press OK and then conform to recover the default setting
of the monitor.
5.2.5 CAMERA MANAGEMENT
1) Add a camera
You can press Right and move to "+" and OK on the "+" icon.
You will find a note on the monitor:
Press the "PAIR" button on the bottom of the camera within 30
seconds.
Then you can press PAIR on the bottom of the camera. It will
notice you "Successfully paired". If there is something wrong it
will notice you "Timeout failure.Make sure the camera is powered
on and try again"
Page 31 / Total 45
Advertisement
Table of Contents
