Table of Contents
Advertisement
GETTING STARTED
4.
This standard baby monitor system consists of a monitor (parent
unit) and a paired camera (baby unit).
To connect a SEPARATLY PURCHASED camera, please
follow Section 5: "MENU" > "Camera Management" > "+" to add.
4.1. POWER THE CAMERA
1) Correctly insert the USB-A plug of the 9ft power cord into the
5V/2A power adapter jack. Make sure to insert the cord in the
correct orientation to avoid damaging the cable or device.
2) Correctly insert the USB-C plug of the 9ft power cord into the
USB type-C jack of the camera.
3) Insert the power adapter into your power outlet and ensure that
it is switched on. You will now see the green light of the
camera flashing, indicating that it is powered well.
4.2. POWER THE MONITOR AND CONNECT
1) Correctly insert the USB-A plug of the 3ft power & data cord
into the 5V/2A power adapter jack.
2) Correctly insert the cord's USB-C plug into the monitor's USB
type-C jack.
3) Insert the power adapter into one of your power outlets and
ensure that it is switched on.
4) Press and hold the Power button "
seconds, then the screen will light up, and within about 15
seconds, the live stream will appear on the screen.
CONGRATULATIONS! You have completed the most important
task! You can take care of your baby now!
Page 9 / Total 45
" for approximately 2
Advertisement
Table of Contents
