Celestron OMNI AZ 102 Instruction Manual page 11

USING THE BLUETOOTH REMOTE
1 1
1. To replace the battery, use a small
Phillips-head screwdriver to loosen
the battery cover screw and slide
the cover downward. Install a fresh
CR2032 battery with the positive (+)
side facing upward. Reposition the
battery cover and secure it in place by
tightening the battery cover screw.
4 4
4. Launch your phone's camera app.
Press the button on the remote to
trigger the shutter on your phone.
WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN.
• Examine devices and make sure the battery compartment is correctly
secured, e.g., that the screw or other mechanical fastener is tightened.
• Do not use if compartment is not secure.
• Dispose of used button batteries immediately and safely. Flat batteries can
still be dangerous.
• Tell others about the risk associated with button batteries and how to keep
their children safe.
2 2
2. Press and hold the button on the
remote for fi ve seconds. A blue light
will turn on and, after a few seconds,
start to blink. The remote is now in
pairing mode.
5 5
5. If your camera is in video mode, press
the button once to start recording
video and press it again to stop
recording.
OMNI A Z 102 TELESCOPE
3 3
3. Using the Bluetooth settings on your
phone, pair it with the device called
"GBshutter."
KEEP OUT OF REACH OF CHILDREN KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical
burns, perforation of soft tissue, and
death. Severe burns can occur within
2 hours of ingestion. Seek medical
attention immediately.
ENGLISH | 11