Clock; Childproof Lock; Changing The Basic Settings; Cleaning System - Siemens HB43AB 20W Series Instruction Manual

Table of Contents

Advertisement

The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
button. You can set a new cooking time
0
using the
or
button. Or press the
@
A
the function selector to the off position. The oven switches off.
Changing the end time
Use the
or
button to change the end time. After a few
@
A
seconds, the change is adopted. If the timer has been set, first
press the
button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
button to reset the end time to the current time. After
A
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.

Childproof lock

The oven has a childproof lock to prevent children from
switching it on by accident.
The oven will not respond to any settings.You can still set the
clock and the timer when the childproof lock is activated.
If the type of heating and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Note: If a hob is connected, it will not be affected by the
childproof lock on the oven.

Changing the basic settings

Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
Selection 1 Selection 2 Selection 3
c1 Clock display
always*
c2 Signal duration
approx.
upon completion of
10 seconds
a cooking time or
timer period
c3 Waiting time until a
approx.
setting is applied
2 seconds
* Factory setting

Cleaning system

The cleaning system regenerates the self-cleaning surfaces in
the cooking compartment.
button twice and turn
0
button twice.
0
arrow.
N
cooking time,
end time or
y
arrow is next
N
only with
-
the
0
but-
ton
approx.
approx.
2 minutes*
5 minutes
approx.
approx.
5 seconds*
10 seconds

Clock

After connecting the appliance to the mains or after a power
cut, the
0
symbol and three zeros flash in the display. Set the
clock.
Press the
0
button.
1.
The clock in the display shows 12:00. The time symbols light
up and the
N
Use the
@
or
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
0
button four times.
1.
The time symbols light up in the display and the
next to
0
.
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
0
the section Changing the basic settings.
Activating the childproof lock
No cooking time or end time should be set.
Press and hold the
The
symbol appears in the display. The childproof lock is
@
activated.
Deactivating the childproof lock
Press and hold the
The
symbol goes out in the display. The childproof lock is
@
deactivated.
No other time-setting option should have been set.
Press and hold the
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the
or
@
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the
or
@
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
The back and side walls of the cooking compartment are
coated with a highly porous ceramic layer. This coating
absorbs and disintegrates splashes from baking and roasting
arrow is next to
.
0
A
button to set the clock.
button to change the clock.
A
@
button for approx. four seconds.
button for approx. four seconds.
@
button for approx. 4 seconds.
0
button to change the basic setting.
A
0
button.
button and change the setting
0
button.
A
button for approx. 4 seconds.
0
arrow is
N
11

Advertisement

Table of Contents
loading

Table of Contents