Figure 4-2 - Slinging And Lifting Diagram; Figure 4-3 - Lifting With Forklift - Global MX PrimeGen Installation, Operation And Maintenance Manual

Global Power Technologies
The lifting lugs on the MX Power Generator are designed for use with 3/8" shackles. Use rigging,
including slings, shackles, etc., with appropriate minimum safe working load. The MX Power Generator
weighs approximately 1750 lb. (794 kg). Refer to Appendix B for the MX Power Generator's detailed
weight and dimensions.
Ensure that the center of gravity is below the spreader bar while lifting. Adjust the
sling tension so that the unit remains level during lift. Mass center may vary based
on MX configuration.
WARNING!
The MX Power System can also be lifted using a forklift from either the front or rear side using the
spaces provided in the base of the unit.
302672 Rev2 | MX PrimeGen
Figure 4-2 – Slinging and Lifting Diagram
Figure 4-3 – Lifting with Forklift
ASSEMBLY AND INSTALLATION
12