Electrical Connection - Electrolux EOC68000X User Manual

Electrical Connection

The oven is designed to be connected
to 230-240V~(50Hz) electricity
supply.
The oven has an easily accessible termi-
nal block which is marked as
follows:
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
This oven must be earthed!
The cable used to connect the oven to
the electrical supply must
comply to the specifications given be-
low.
For UK use only
Min.
Connec-
size
tion
Cable/
via
flex
Cooker 2,5 mm
Control
Circuit
It is necessary that you install a double
pole switch between the oven and the
electricity supply (mains), with a mini-
mum gap of 3mm
between the switch contacts and of a
type suitable for the required load in
compliance with the current regulations.
The switch must not break the yellow
and green earth cable at any point.
Cable/
flex Fuse
type
2
PVC/PVC min:
twin and 15A
earth max:
20A
electrical connection electrolux 57
Important
After installation and connecting, the ca-
ble must be placed so that it cannot at
any point reach a temperature of more
than 50°C above the ambient tempera-
ture.
Before the oven is connected, check
that the main fuse and the domestic in-
stallation can support the load; and that
the power supply is properly earthed.
The manufacturer declines any re-
sponsibility should these safety
measures not be carried out.