Table of Contents
Advertisement
Self-consumption
1
2
3
P1: Activation limit
This is the minimum power (in watts) that must be
produced before the consumer is activated.
You can enter any value from 1 watt to 999 000 watts.
P2: Deactivation limit
The consumer is switched off when the power generated
falls below this value.
Dashed area: Self-consumption active
In this power range, self-consumption is activated.
Pc: Self-consumption in the home network
The grey area shows the current self-consumption in the
home network. This is taken into account in the dynamic
self-consumption control. Means the contact is only
closed when activation limit P1 less the self-consumption
reaches the set value P1. The contact is opened when
deactivation limit P2 less the self-consumption reaches
the set value P2.
© 2022 KOSTAL Solar Electric GmbH
4
5
6
7
8
8
9
10
11
12
125
Advertisement
Table of Contents
