Kostal PIKO 10-20 Operation Manual page 116

Active power control
1 2 3
Activating the activepower control
function in the Webserver
Connect the inverter and computer with an Ethernet
1.
cable. Ch. 6.1
Launch an Internet browser.
2.
Enter the IP address of the master inverter in the
3.
address line of the browser and confirm with
"Return".
The input screen for the access data opens.
P
Enter your user name and password.
4.
The Webserver opens.
P
Select "Settings" > "Analog inputs".
5.
"Analog inputs" opens.
P
Select the function "Active power control".
6.
Click on the "Accept" button.
7.
The active power control for the ripple control
H
receiver is active.
© 2022 KOSTAL Solar Electric GmbH
4 5 6 7 7 8 9 10 11
IMPORTANT
INFORMATION
The configuration must be carried
out on the master inverter to
which the ripple control receiver is
connected.
No further adjustments are
necessary for the other inverters.
INFO
The IP address can be queried
by way of the control panel in the
"Settings" menu.
The IP address is found in the inverter
menu under
"Settings/Communication/Network
settings 2".
Additional entry options in the
address line of the browser: S and
the serial number of the inverter
on the type plate (example: http://
S12345FD323456)
12
116