Larson Electronics EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual page 97

6. Click Save to save the settings.
7. Locate the external wireless device beside the camera, and go to Configuration >
Advanced Configuration> System> Remote Control to arm the camera and
study the wireless alarm.
Figure 6-55 Configuring Wireless Alarm Settings
 PIR Alarm
Purpose:
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the
detector's field of view. The heat energy dissipated by a person, or any other warm
blooded creature such as dogs, cats, etc., can be detected.
Steps:
1. Enter the PIR Alarm Settings interface:
Configuration > Advanced Configuration> Basic Event> Other Alarm
2. Check the checkbox of Enable PIR Alarm to activate the PIR alarm function.
3. Input the alarm name in the text field as desired.
4. Check the checkbox to select the linkage methods taken for the PIR alarm.
5. Click the Edit button to set the arming schedule.
6. Click Save to save the settings.
7. Go to Configuration > Advanced Configuration> System> Remote Control to
arm the camera.
Explosion Proof Network IP Camera User Manual
93