Chapter 8 Counting - Larson Electronics EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual

Chapter 8 Counting

Purpose:
Counting function is used to calculate the number of object entered or exited a certain
configured area and is widely applied to the entrances or exits.
Notes:
 Counting function is supported by some certain non-iDS camera models.
 Compared with the people counting function supported by the iDS camera, the
counting function of non-iDS camera does not require for calibration settings.
 It is recommended to install the camera vertically to the ground, and thus the
counting function can be more accurate.
Steps ：
 Counting Configuration
1. Enter the Counting Configuration interface:
Configuration > Advanced Configuration > Counting
Explosion Proof Network IP Camera User Manual
137