Larson Electronics EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual page 90

 The captured image can also be uploaded to the available SD card or network
disk.
 Trigger Channel
The video will be recorded when the motion is detected. You have to set the
recording schedule to realize this function. Please refer to Section 7.2 for
detailed information.
 Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note: To trigger an alarm output when an event occurs, please refer to Section
6.6.4 Configuring Alarm Output to set the related parameters.

Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
area of each area for different day/night switch.
 Day/Night Switch OFF
Steps:
(1)Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2)Select OFF for Switch Day and Night Settings.
Explosion Proof Network IP Camera User Manual
Figure 6-48 Expert Mode of Motion Detection
86