Larson Electronics EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual page 47

Note: If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
 Synchronizing Time Synchronization Manually
Enable the Manual Time Sync function and then click
from the pop-up calendar.
Note: You can also check the Sync with computer time checkbox to synchronize the
time of the camera with that of your computer.
 Click the DST tab page to enable the DST function and Set the date of the DST
period.
2. Click Save to save the settings.
Explosion Proof Network IP Camera User Manual
Figure 6-3 Time Sync by NTP Server
Figure 6-4 Time Sync Manually
Figure 6-5 DST Settings
to set the system time
44