Valve Stem Access - Winnebago Vita 2020 Manual

VALVE STEM ACCESS

®
(Mercedes-Benz Sprinter Chassis)
Front Wheel Valve Stem Access on
18-Hole Steel Wheel with Push-On
Full Wheel Trim
–If Equipped
1. Obtain a double angle push/pull truck tire
gauge.
2. Locate the 6" valve cap tool (provided in your
InfoCase).
3. Push the end of the valve cap tool onto the
front wheel valve stem cap.
4. Using the valve cap tool as a remote handle,
unscrew the valve stem cap (retaining cap in
the end of the valve cap tool).
5. Adequate clearance is available to insert the
tire gauge onto valve stem.
DRIVING YOUR MOTORHOME
6. When tire pressure testing is complete,
reinstall the valve stem cap (with the cap still
retained in the valve cap tool end).
7. Remove valve cap tool from valve stem cap.
Rear Inner Dual Valve Stem Access
on 18-Hole Steel Wheel with Push-
On Full Wheel Trim
–If Equipped
1. Obtain a double angle push/pull truck tire
gauge.
2. Locate the 6" valve cap tool (provided in your
InfoCase).
3. Push the end of the valve cap tool onto the rear
inner dual valve stem cap.
SECTION 3 –
3-5