Stihl RMI 632 C Instruction Manual page 149

messages" appears.
The message details are displayed by
pressing the OK button. ( 24.)
2. Events:
List of the last activities of the robotic
mower.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
If certain activities occur too
frequently, detailed information is
available from your specialist
dealer. Errors during normal
operation are documented in the
messages.
3. iMOW® status:
Information on the robotic
mower
– Charge state:
Battery charge in percent
– Rem. time:
The remaining mowing duration during
the current week in hours and minutes.
This display is only available with the
mow plan type "Dynamic".
– Date and time
– Start time:
Start of the next planned mowing
operation
– Mowing ops:
Total number of completed mowing
operations
– Mowing hours:
Duration of all completed mowing
operations in hours
– Distance:
Total distance covered in metres
0478 131 9954 E - EN
– Ser.-No.:
Serial number of the robotic mower.
This is also to be found on the rating
plate in the compartment beneath the
control panel.
– Service:
Date of the last service carried out by
the STIHL specialist dealer
– Battery:
Serial number of the battery
– Software:
Installed machine software
4. Lawn status:
Information on the lawn
– Mowing area in square metres:
This value is entered during initial
installation or new installation. (
– Round time:
Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4:
Distance of the relevant starting point
from the docking station in metres,
measured in a clockwise direction.
( 11.14)
– Circumference:
Circumference of the mowing area in
metres
– Edge mowing:
Frequency of edge mowing per week.
( 11.13)
5. Radio module status
(RMI 632 C, RMI 632 PC):
Information on the radio module
– Satellites:
Number of satellites within range
– Position:
Current position of the robotic mower;
available if the satellite connection is
strong enough
– Signal strength:
Signal strength of the mobile radio
connection; the more plus characters
shown (max. "++++"), the better the
connection.
– Network:
Network ID, comprising country code
(MCC) and provider code (MNC)
– Mobile phone number:
Mobile phone number of the owner; is
entered in the app (
– IMEI:
Hardware number of the radio module
9.6)
– IMSI:
International mobile subscriber identity
– SW:
Software version of the radio module
– Ser.-No.:
Serial number of the radio module
– Modem SN:
Serial number of the modem
10.)
147