Table of Contents
Advertisement
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
WLAN
card.
5. Remove the
display
assembly.
6. Remove the
hinge
caps.
7. Remove the
display
bezel.
About this task
The following images indicate the location of the hinge caps and provides a visual representation of the installation procedure.
Steps
1. Remove the three (M2.5x3.8) from the left hinge.
2. Lift and remove the left hinge from the display assembly.
3. Remove the three (M2.5x3.8) from the right hinge.
4. Lift and remove the right hinge from the display assembly.
60
Removing and installing components
Advertisement
Table of Contents
