Steps
1. Place the display panel and display assembly on a clean and flat surface.
2. Place the display bezel on the display assembly.
3. Align the tabs on the display bezel to the slots on the display assembly.
4. Press down on the display bezel and snap the display bezel in place.
Next steps
1. Install the
hinge
cap.
2. Install the
display
assembly.
3. Install the
Wireless
card.
4. Install the
base
cover.
5. Install the
SD
card.
6. Follow the procedure in
Hinges
Removing the hinges
Prerequisites
1. Follow the procedure in
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
59