Installing The Power Button With Optional Fingerprint Reader - Dell Vostro 3515 Service Manual

Steps
1. Remove the two (M2.5x5) screws that secure the display assembly hinge to the palmrest and keyboard assembly.
2. Lift the display assembly hinge to access the power button.
3. Remove the (M2x2) screw that secures the power button to the palmrest and keyboard assembly.
4. Peel the fingerprint reader Flexible Flat cable from the palmrest and keyboard assembly.
5. Lift the power button with fingerprint reader, along with its cable, off the palmrest and keyboard assembly.

Installing the power button with optional fingerprint reader

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the power button with optional fingerprint reader and provides a visual
representation of the installation procedure.
Removing and installing components 47