Table of Contents
Advertisement
Operation
Dimmer
DIMMER (DIM):
The DIMMER function is used to change the brightness of the Display.
The function is controlled by the DIM button.
Press the DIM button repeatedly to choose the brightness.
DAB Radio Operation
Note!
• Make sure that you have correctly connected and fully extended the antenna.
• You can program up to 30 DAB radio stations.
• National letters containing diacritical marks may not be displayed correctly.
Tuning in to a Station
1. Rotate the INPUT knob on the front panel or press the
controller to select the DAB input. [DAB] will be displayed.
When you switch the CD-Receiver on for the first time, [SCANNING] will be display-
ed and the device will search for the first available station.
If there is no signal, [NO DAB] will be displayed.
2. Select a station using one of the following methods:
• Manual Tuning
Repeatedly press the ►►l / l◄◄ buttons on the front panel or ►► / ◄◄ buttons
on the remote controller to change the frequency until you find the station you want.
• Preset Tuning (available only after the stations are programmed)
Repeatedly press the 0-9, 10+, PRESET ►l / l◄ buttons to select the desired preset
number.
The CD-Receiver will tune to the selected station automatically.
◦ If the preset number is less than 10, press the number buttons 1-9.
◦ If the preset number is 10 or higher, press the 10+ button and one of the number
buttons 0-9.
◦ If the preset number is 20 or higher, press the10+ button twice and one of the num-
ber buttons 0-9.
◦ If the preset number is 30, press the 10+ button three times and 0.
Program radio stations
• Automatically
Press the SCAN button once to activate the Scanning mode.
◦ [SCANNING] will blink.
◦ All available stations will be programmed and stored.
◦ The first programmed radio station will be broadcasted automatically.
• Manually
1.Tune in to a radio station.
2.Press the PROG button to activate the Program mode.
The preset number will blink.
3.Press the PRESET ►l / l◄ buttons to select a preset number for this radio station.
Note! If you select a number higher than 30, then the preset number will be changed to
"1" automatically.
23
button on the remote
Advertisement
Table of Contents
