Warranty; Maintenance Checklist; Product Specifications; Torque Values - Matrix G7-S22 Assembly Instructions Manual

Table of Contents

Advertisement

PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion
adjustment, or any other type of adjustment mechanisms to a comfortable
start position. Make certain that the adjusting mechanism is fully
engaged to prevent unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.

MAINTENANCE CHECKLIST

ACTION
Clean Upholstery
1
Inspect Cables
2
Clean Guide Rods
Inspect Hardware
Inspect Frame
Clean Machine
Clean Grips
1
Lubricate Guide Rods
Upholstery & Grips should be cleaned with a mild soap
1
and water or a non-ammonia based cleaner.
2
Cables should be inspected for cracks or frays and immediately replaced if present.
If excessive slack exists cable should be tightened without lifting the head plate.
Guide rods should be lubricated with Teflon based lubricant. Apply the
3
lubricant to a cotton cloth and then apply up and down the guide rods.
2
FREQUENCY
Daily
Daily
Monthly
Monthly
Bi-Annually
As Needed
As Needed
As Needed
3

WARRANTY

For North America, please visit matrixfitness.com for warranty
information along with warranty exclusions and limitations.

PRODUCT SPECIFICATIONS

Max User Weight
Max Training Weight
G7-S22
G7-S22B
G7-S22BH
Product Weight
G7-S22
G7-S22B
G7-S22BH
Overall Dimensions
(L x W x H)*
* Ensure a minimum clearance width of 0.6 meters (24") for access to and
passage around MATRIX strength equipment. Please note, 0.91 meters (36")
is the ADA recommended clearance width for individuals in wheelchairs.

TORQUE VALUES

M10 Bolt (Nyloc Nut & Flowdrill)
M8 Bolts
M8 Plastic
M6 Bolts
Pad Bolts
136 kg / 300 lbs
138.4 kg / 307.5 lbs
90 kg / 200 lbs
135 kg / 300 lbs
390 kg / 860 lbs
283.5 kg / 625 lbs
328.5 kg / 725 lbs
143.5 x 173.5 x 197 cm /
56.4 x 54.1 x 77.6"
77 Nm / 57 ft -lbs
25 Nm / 18 ft-lbs
15 Nm / 11 ft-lbs
15 Nm / 11 ft-lbs
10 Nm / 7 ft-lbs

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultra series

Table of Contents