Installation; Maintenance; Warranty - Matrix MAGNUM Series Instructions Manual

PRODUCT INFORMATION
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX products to instruct all
individuals, whether they are the end user or supervising personnel on proper usage of
the equipment.
It is recommended that all users of MATRIX exercise equipment be informed of the
following information prior to its use.
Do not use any equipment in any way other than designed or intended by the
manufacturer. It is imperative that MATRIX equipment be used properly to avoid injury.

INSTALLATION

1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a
stable base and properly leveled.
2. SECURING THE EQUIPMENT: Manufacturer REQUIRES that this stationary MATRIX
equipment be secured to the floor to stabilize equipment and eliminate rocking or
tipping over. This must be performed by a licensed contractor.
3. Under no circumstances should you slide equipment across the floor due to risk of
tipping. Use proper materials handling techniques and equipment recommended by
OSHA.
All anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.

MAINTENANCE

1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use
only replacement parts supplied by your country's local MATRIX dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information. If unreadable or missing, contact your MATRIX
dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth
operating equipment as well as keeping your liability to a minimum. Equipment
needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments or performing maintenance or
repair of any kind is qualified to do so. MATRIX dealers will provide service and
maintenance training at our corporate facility upon request.
ENGLISH
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is
specifically regulated by the owner. It is up to the owner to determine who is allowed
access to this training equipment. The owner should consider a user's: degree of
reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its
intended purpose in accordance with the instructions provided by the manufacturer.
This equipment is for indoor use only. This training equipment is a Class S product
(designed for use in a commercial environment such as a fitness facility). This training
equipment is in compliance with EN 957-1 and the relevant portions of EN 957-2 and EN
957-4.
UNPACKING
Thank you for purchasing a MATRIX Fitness product. It is inspected before it is
packaged. It is shipped in multiple pieces to facilitate the compact packaging of the
machine. Prior to assembly, confirm all the components by matching them with the
exploded diagrams. Carefully unpack the unit from this box and dispose of the packing
materials in accordance with your local laws. Exercise device must be assembled by a
trained assembly team or be pre-assembled prior to delivery.
CAUTION
To avoid injury to yourself and prevent damage to the frame components, be sure
to have proper assistance removing the frame pieces from this box. Please be sure
to install the equipment on a stable base, and properly level the machine. Ensure
a minimum clearance width of 0.6 meters (24") for access to and passage around
MATRIX strength equipment. Please note, 0.91 meters (36") is the ADA recommended
clearance width for individuals in wheelchairs.

WARRANTY

For North America, please visit matrixfitness.com for warranty information along with
warranty exclusions and limitations.
4