Ukw Radio; Automatic Station Search; Manual Station Search; Settings - Hama 00054873 Operating Instructions Manual

12. UKW radio

This radio has a software-based VHF receiver that can receive and play analogue radio. It covers the
frequency range from 87.5 MHz to 108 MHz.

12.1 Automatic station search

– – OR – –
The radio automatically searches for stations that can be played back with sufficient quality. As soon as a
station is found, the search stops automatically and playback starts. Start the search again to search for
the next available station.

12.2 Manual station search

• To tune into a station manually, first switch to tuning mode.
• Tuning now takes place in steps of 0.05 MHz.
MAIN MeNU
• Once you have set the frequency, you can switch back to the radio's volume setting.
• If manual tuning is active, the currently set frequency is highlighted on the screen.
NAVIGATe

12.3 Settings

Additional functions are available to optimise the quality of playback and the reliability of the search.
• Search settings
fM
Confirm the selection with "yeS" to play only stations that can be received by the radio in sufficient
quality. Select "No" to also stop at stations which can only be received in weak quality.
• Audio setting
With analogue radio signals, the radio may try to automatically calculate and play back a stereo quality
reproduction. If there are audible quality problems during playback, select "yeS" to play back the signal
unchanged in mono quality.
eNTeR
By selecting "NO" , the conversion to a stereo signal is carried out automatically.
FM
88.00 MHZ
FM
SCANNING
AUDIO
FM
88.00 MHZ
NAVIGATE
88.05 MHZ
88.10 MHZ
Scanning
NAVIGATE
ON
23
UKW RADIO
ENTER
OFF