Other; Restore Factory Settings; Licenses - Panasonic SOUNDSLAYER SC-GNW10 Owner's Manual

Restore factory settings

This is done when returning the SC-GNW10 to the state of purchase, such as by discarding or transferring the
SC-GNW10.
To restore the factory settings, the SC-GNW10 and the transmitter need to be connected wirelessly.
1
Turn the [VOL] dial in the [j] direction until the volume reaches the minimum level [0].
• An operation tone is made when the volume reaches the minimum level [0].
2
Press and hold the [
• An operation tone is made and the SC-GNW10 is in the factory settings mode.
• When the SC-GNW10 enters the factory settings mode, the operation indicator (L) and the operation indicator
(R) each blinks (blue) once every second.
3
Press the [
• The settings are each initialised, returning to the factory settings.
• The SC-GNW10 turns off.
Note:
• The pairing information for the SC-GNW10 and the transmitter does not get deleted even when the factory settings
are restored. (There is no need to pair the units again.)

Licenses

SOUNDSLAYER is a trademark of Panasonic Holdings Corporation.
PS4 and PS5 are registered trademarks or trademarks of Sony Interactive Entertainment Inc.
Windows, Xbox are registered trademarks or trademarks of Microsoft Corporation.
Nintendo Switch is a registered trademark or a trademark of Nintendo.
Apple, macOS are trademarks or registered trademarks of Apple Inc. in the United States and/or other
countries.
Other names of systems and products mentioned in these instructions are usually the registered trademarks
or trademarks of the manufacturers who developed the system or product concerned.
TM ®
Some and marks are not specified in the text.
] and [
] button while the SC-GNW10 is in the factory settings mode.

Other

] buttons for about 5 seconds or more.
17