Panasonic SOUNDSLAYER SC-GNW10 Owner's Manual page 10

∫ When connecting to a PC
In order to properly use the SC-GNW10, depending on the operating environment and OS, you need to
change some sound settings on the computer. Two devices are shown when you connect the transmitter, so
make the settings as follows:
Make "Panasonic SC-GNW10 (Game)" the default device for "Playback".
Click on
1 Click the speaker icon in the task tray.
2 Click the " " at the top right of the volume bar.
3 Select "Panasonic SC-GNW10 (Game)".
Make "Panasonic SC-GNW10 (Game)" the default device for "Playback",
make "Panasonic SC-GNW10 (Chat)" the default device for "Recording".
Click on
XXXXXXXXXXX
Sounds
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
10:00
01/12/2023
1 Right-click the speaker icon in the task tray and select "Sounds".
2 Click the "Playback" tab.
3 Right-click "Panasonic SC-GNW10 (Game)" and select "Set as Default Device".
4 Click the "Recording" tab.
5 Right-click "Panasonic SC-GNW10 (Chat)" and select "Set as Default Device".
Note:
• Depending on the specifications of the computer, the settings may change if you plug the USB cable into a different
terminal or if you restart the computer. If this happens, change the sound settings on the computer to
"Panasonic SC-GNW10 (Game)" again.
Click on
XXXXXXXXXXXXXX.
10:00
01/12/2023
Sound
Playback Recording
XXXXX
XXXXX
XXXXXXXXXXXXXXX
XXXXX
Panasonic SC-GNW10 (Game)
XXXXXXXXXXXXXXX
XXXXX
XXXXX
XXXXX
Click on XXXXX

Set as Default Device
XXXXX
XXXXX
XXXXX
Before use
Select
Select playback device
65
Panasonic SC-GNW10 (Game)
Panasonic SC-GNW10 (Chat)
10:00
01/12/2023
Sound
Playback Recording
XXXXX
Click on

10
Click on

XXXXX XXXXX
XXXXX
XXXXXXXXXXXXXXX
XXXXX
Panasonic SC-GNW10 (Game)
XXXXXXXXXXXXXXX
XXXXX