Changing The Sc-Gnw10'S Settings; Changing The Volume Of The Other Party In A Chat (Chat Volume Mode); Adjusting The Bass (Bass Level) - Panasonic SOUNDSLAYER SC-GNW10 Owner's Manual

Changing the SC-GNW10's settings

Changing the volume of the other party in a chat (chat volume mode)

Adjust the audio output of the other party in a chat that is output from the speakers.
(Factory default: Unadjusted value (0 dB))
1
While pressing the [
operation indicators blink (blue).
• While in the chat volume mode, the operation indicator (L) and the operation indicator (R) each blinks (blue)
three times repeatedly.
2
While the SC-GNW10 is in the chat volume mode, turn the [VOL] dial to adjust (7 levels).
• Output increases when you turn in the [i] direction.
• Output decreases when you turn in the [j] direction.
• Operation tones are made at the maximum value (i3 dB), unadjusted value (0 dB), and minimum value
(j3 dB).
(The tone sounds twice when you reach the maximum value or the minimum value, and sounds once
when there is no adjustment.)
3
Press any button other than the [VOL] dial to complete the settings.
• The settings are also completed if the SC-GNW10 is left in the chat volume mode continuously for 10 seconds or
more without any operations.
Note:
• The setting is maintained until it is changed again.
• Adjustment is only possible when connected wirelessly.
• You can also switch the chat volume using the app for use in Windows (

Adjusting the bass (Bass Level)

Adjusts the volume of the bass that is output from the speakers.
(Factory default: level 3)
1
While pressing the [
operation indicators blink (blue).
• While in the bass level mode, the operation indicator (L) and the operation indicator (R) each blinks (blue) two
times repeatedly.
2
While the SC-GNW10 is in the bass level mode, turn the [VOL] dial to adjust (5 levels).
• The volume of the bass increases when you turn in the [i] direction.
• The volume of the bass decreases when you turn in the [j] direction.
• Operation tones are made at the maximum value (level 5), unadjusted value (level 3), and minimum value (level 1).
(The tone sounds twice when you reach the maximum value or the minimum value, and sounds once
when there is no adjustment.)
3
Press any button other than the [VOL] dial to complete the settings.
• The settings are also completed if the SC-GNW10 is left in the bass level mode continuously for 10 seconds or
more without any operations.
Note:
• The setting is maintained until it is changed again.
• Adjustment is only possible when connected wirelessly.
• You can also switch the bass level using the app for use in Windows (
Operation
] button, turn the [VOL] dial in the [i] direction until the
] button, turn the [VOL] dial in the [j] direction until the
15
l
16).
l
16).