Using The Sc-Gnw10; Wirelessly Connecting The Sc-Gnw10 And The Transmitter; Turn On The Sc-Gnw10 - Panasonic SOUNDSLAYER SC-GNW10 Owner's Manual

Using the SC-GNW10

The SC-GNW10 is worn by placing it around your neck, on your shoulders.

Wirelessly connecting the SC-GNW10 and the transmitter

Turn on the SC-GNW10

Before turning on the SC-GNW10, make sure the transmitter is connected to your PC/Gaming console and
powered on. The cyan operation indicator will blink.
Press and hold the [Í] button for about 2 seconds until the operation indicator (R) blinks
(cyan).
The wireless connection between the SC-GNW10 and the transmitter starts.
When the wireless connection is completed, the SC-GNW10 and the transmitter are in the following states:
SC-GNW10
Transmitter
*1 If the "Lighting Settings" in the app for use in Windows are set to "OFF", the indicators turn off after about 3
seconds.
*2 Blinks (red) when the battery level drops to 20 %.
To turn the SC-GNW10 off
Press and hold the [Í] button for about 2 seconds until the operation indicator (L) blinks 3 times.
• The operation indicator (L) turns off and the power of the SC-GNW10 turns off.
Note:
• If the SC-GNW10 and the transmitter do not connect wirelessly, try pairing again. (
• If the sound is distorted, turn down the volume.
• If there is an excessive input signal, the function of the SC-GNW10 may stop automatically and the power may be
turned off for safety.
• When connected wirelessly, if there is no sound for 5 minutes or more, the SC-GNW10 automatically turns off. (Auto
off function)
• The auto off function may not work in some cases when there is noise from other devices.
• The settings for the auto off function can be changed in the app for use in Windows. (
Operation indicator (L)
Operation indicator (R)
Operation indicator
Before use
Lights (cyan)
Lights (cyan)
Lights (cyan)
12
*1
*1*2
l
16)
l
16) (Factory default: on)