Table of Contents
Advertisement
The front to rear adjustments are available to suit the best physical location for the device
in relationship to the rear access for cabling, as well as to meet the aesthetic requirements
of the installation.
Camera off set
Centerline of display
Centerline of display
Figure 13. Center Line attachment Location
In addition to the front to rear attachment locations, the MedView can be mounted in one
of two left/right locations above the display, as shown in Figure 12. The camera can be
mounted central to the screen to give an optimal view at the remote location of the room.
The alternate location of the MedView system being central to the screen gives a more
balanced look to the system which may be more aesthetically pleasing.
The offset or central locations are available by using the left/right mounting holes
available on the top plate, shown in Figure 9. above, in conjunction with the alternate
attachment points on the base of the MedView system, shown in Figure 3.
It is recommended that prior to selecting a final location for the MedView, bench testing
is undertaken.
Copyright 2021 Iron Bow Technologies
16
Advertisement
Table of Contents
