Table of Contents
Advertisement
System Installation
The MedView system can be mounted above, or below, a display as well as wall or
ceiling mounted. The diagram below shows the overall system dimensions plus the
mounting hole pattern in the base of the system. The basic mounting arrangement utilizes
standard 100mm x 100mm VESA compliant mounting holes, which are available in two
locations near the middle of the MedView. The first set of mounting holes is centrally
located (left to right) of the system, with a second set located directly below the camera.
These two mounting locations allow the system to be fitted directly above a monitor
where, either the system can be central to the display, or the camera can be central to the
display. In addition to the central VESA mounts, standard ¼-20 mounting holes are also
centrally available in two locations, as well as mounting holes at the extreme edges for
custom mounting arrangements.
Please take careful note of the maximum thread depth available for the various mounting
point on the base of the MedView.
Copyright 2021 Iron Bow Technologies
Figure 3. MedView System Dimensions
MedView System Weight: 17 pounds
10
Advertisement
Table of Contents
