Table of Contents
Advertisement
Preparation
Adjusting the height of the
upper basket
The upper basket height adjustment
mechanism has been designed for you to
create large spaces in the lower or upper
sections of your machine depending on your
needs by adjusting the height in the upper or
lower direction while your basket is empty or
loaded.
Thanks to this mechanism, you can use your
basket in three different positions, namely
lower, middle and upper positions (1, 2, 3).
1. To raise your basket, hold the upper
basket wires with both hands while the
basket is in the lowermost position and
pull them up (A).
2. You will hear a "Click" from the right and
left mechanisms, indicating that the basket
has reached the next level. Release the
basket.
Repeat the process if the height is not
sufficient.
1
2
3
22
/46 EN
To lower the basket, while it is in the
uppermost position;
1. Hold the upper basket wires with both
hands, slightly lift up the basket and
simultaneously push and release the
latches shown in the figure (B).
1
2. Lower the basket from its current position
to the lower one.
2
3. Release the basket after it has reached
one level down.
3
Repeat the process if the height is not
sufficient.
C
The movement mechanism
may not function properly if the
upper basket is overloaded or
if the weight distribution is not
balanced. In heavier conditions,
there is the risk of falling one level
down.
C
Make sure that the adjustment
mechanism has the same positions
on the right and left sides of the
upper basket.
/
Advertisement
Table of Contents
