Position The Drain Hose; Inlet Pipe Connection - Haier HWM100-1678ES5 User Manual

Top load fully automatic washing machine
Table of Contents

Advertisement

Installation & Adjustment

Position the drain hose

1.Do not let the drain hose run over
doorsills that protrude 10cm from the
floor.
2.Do not trample on the drain hose.
3.Cut the excessive part if needed.
Note: The new water inlet hose supplied with the appliance is to be used and the old
water inlet hose should not be reused.

Inlet pipe connection

The new hose-sets supplied with the appliance are to be used and that old hose-sets
should not be reused.
Connect the water faucet
water faucet,suitable
The exit end face of the faucet
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid
leakage.
4.If extra drain hose is needed, please
make separate purchase.The inner
diameter of the extra hose shall not
less than 30mm,and the length shall
not exceed 1.5m.
5.If the extra hose is too long, cut it either
at A or at B point.
water faucet, not suitable
6
≤1.5m
A
B

Advertisement

Table of Contents
loading

Table of Contents