Table of Contents
Advertisement
Control Panel
A "Start/Pause" button
After the power is switched on, press it to start the machine.
When operation in progress, press the button if you want to pause.
Press the button again if you want to resume the operation.
B "Wash" "Rinse" "Spin" button
You may only allow to adjust the wash, rinse and spin duration or count
according to your needs after selected the program Normal, Quick, Cotton,
Heavy, Delicate, Hijab, Bedding or Jeans. But the soaking cycle is
mandatory and no adjustment is being allowed regardless any program
that you selected.
When you select the rinse cycle count, you may choose to retain the rinse
water as well inside the tub up to 4 hours. The appliance will send an alarm
every 15 minutes to remind the user about the rinse water that kept inside
the tub. You may press the button "Start / Pause" that allow the rinse water
to drain out from the tub.Otherwise, the water will drain out from the tub
automatically once the time's up.
C "Water Level" button
If you choose the "Normal" program mode, the appliance will decide the
right volume of water required based on the fabric types and laundry
volume inside the tub before the wash cycle start. Or you may adjust the
water level manually before the washing cycle start.
When soaking, washing and rinsing cycle in progress, you may press
the button "Water level" to add water if required. The appliance will stop
adding water if the water reached the overflow level or after you remove
your finger from the button "Water level".
The actual water level inside the tub may vary from the water level
indicated on the control panel. This is subject to the clothing dampness
condition which is inside the tub.
12
Advertisement
Table of Contents
