TP-Link Omada SG2218P Installation Manual page 5

The front panel of SG2218P is shown as the following figure.
Figure 1-3 Front Panel of SG2218P
The front panel of SG2428P is shown as the following figure.
Figure 1-4 Front Panel of SG2428P
LEDs
The front panel of SL2428P is shown as the following figure.
Figure 1-5 Front Panel of SL2428P
LEDs
LEDs
For SG2218
LED Indication
On: The switch is powered on.
PWR Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
Flashing: The switch works properly.
SYS
On or Off: The switch works improperly.
On: A device is connected to the corresponding port but no activity.
Link/Act Flashing: Data is being transmitted or received.
Off: No device is connected to the corresponding port.
On: Running at 1000 Mbps.
1000Mbps
Off: Running at 10/100 Mbps or no device is linked to the corresponding port.
For SG2210MP/SG2218P/SG2428P/SL2428P
LED Indication
On: The switch is powered on.
PWR Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
LEDs Reset 10/100/1000 Mbps RJ45 Port
LED Mode Reset
Switch Button
Reset
LED Mode 10/100 Mbps RJ45
Port and PoE Port
Switch Button
10/100/1000 Mbps
RJ45 Port
10/100/1000
Mbps RJ45 Port
Omada Smart Switch
SFP Slot
SFP Slot
SFP Slot
Introduction 02