Multiclient Integrated Kvm - Philips EVNIA 34M2C8600/75 User Manual

Note
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact the manufacturer for wall-
mount installation.
Warning:
This product is a curve design, when
attaching/detaching the base, place the
protective material under the monitor
and, to avoid damage, do not press
down on the monitor.
* Display design may differ from those
illustrated in this manual.
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
0°
-5°

2.4 MultiClient Integrated KVM

What is it?
1
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
How to enable MultiClient Integrated
2
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the OSD
menu setting.
Use USB-C and HDMI or DP as input,
then use USB-C/USB-B as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the "USB
C" and "USB UP" port of this monitor
at the same time.
2. Connect peripherals to the USB
downstream port of this monitor.
1
90°
HDMI 1
3. Enter to OSD menu. Go to KVM
layer and select "Auto", "USB C"
or "USB Up" to switch the control
of peripherals from one device to
another. Simply repeat this step for
switching the control system using
one set of peripheral.
12
Source
HDMI/DP
USB C
HDMI 2
PC1/PC2
PC1
USB UP
2
USB
USB Upstream
USB UP
USB C
1
USBC
PC2
USB