Related Manuals for Philips B Line 342B1
Summary of Contents for Philips B Line 342B1
- Page 1 B Line 342B1 www.philips.com/welcome EN User manual Customer care and warranty 25 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
6.1 Resolution & Preset Modes ... 23 7. Power Management ....24 8. Customer care and warranty . 25 8.1 Philips’ Flat Panel Displays Pixel Defect Policy ......25 8.2 Customer Care & Warranty ..28 9. Troubleshooting & FAQs ..29 9.1 Troubleshooting ......29... -
Page 3: Important
This electronic user’s guide is intended • Remove any object that could fall for anyone who uses the Philips display. into ventilation holes or prevent Take time to read this user’s manual proper cooling of the monitor’s before you use your monitor. - Page 4 1. Important monitor damage will not be covered • In order to maintain the best under warranty. performance of your monitor and use it for a longer lifetime, please • Do not knock or drop the monitor use the monitor in a location during operation or transportation.
-
Page 5: Notational Descriptions
1. Important service center. (Please refer to 1.2 Notational Descriptions Service contact information listed The following subsections describe in Regulation & Service Information notational conventions used in this Manual.) document. • For transportation information, please refer to “Technical Notes, Cautions and Warnings Specifications”. -
Page 6: Disposal Of Product And Packing Material
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- back initiatives and recycling programs This marking on the product or on... -
Page 7: Setting Up The Monitor
2. Hold the stand with both hands. Start Gently attach the stand to the Register your product and get support at www.philips.com/welcome VESA mount area until the latch locks the stand.Gently attach the base to the stand. (2) Use your fingers to tighten the screw located at the bottom of the base. - Page 8 2. Setting up the monitor Connecting to your PC Fast Charger USB UP step 2 USB UP step 1 Connect to PC Kensington anti-theft lock 1. Connect the power cord to the back Earphone jack of the monitor firmly. DisplayPort input 2.
- Page 9 The monitor must be powered ON at all connection port. times to be able to use this function. Some select Philips displays may not Power or Charge your device when it enters to “Sleep/standby” mode (White power LED blinking). In that case, please enter to OSD Menu and select “USB Standby Mode”, then, turn the...
-
Page 10: Operating The Monitor
2. Setting up the monitor Customize your own “USER” key 2.2 Operating the monitor This hot key allows you to setup your Description of the control buttons favorite function key. 1. Press button on the front bezel to enter OSD Menu Screen. ... - Page 11 On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD displays. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
- Page 12 2. Setting up the monitor Resolution notification Physical Function This display is designed for optimal Tilt performance at its native resolution, 30˚ 2560x1080@60Hz When the monitor is powered on at a different resolution, -5˚ an alert is displayed on screen: Use 2560x1080@60Hz for best results.
-
Page 13: Multiview
• PIP / PBP Mode: There are two Why do I need it? modes for MultiView: [PIP] and [PBP]. With the ultra high resolution Philips [PIP]: Picture in Picture MultiView display, you can experience a world of connectivity in a comfortable Open up a sub-window way in the office or at home. - Page 14 2. Setting up the monitor • PIP Position: When PIP is activated, Note there are four sub-window positions The black strip shows on the top and to choose. the bottom of the screen for the correct aspect ratio when in the PBP mode. If Top-Left Top-Right you expect to see full screen side by...
-
Page 15: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Warning 2.4 Remove the Base Assembly This product is curve design, when for VESA Mounting attach / detach the base, place the Before you start disassembling the protective material under the monitor monitor base, please follow the and do not press down the monitor to instructions below to avoid any possible avoid the damage. -
Page 16: Image Optimization
Game, Economy, LowBlue Mode, brightness, contrast, color and sharpness SmartUniformity and Off. in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized display performance. Why do I need it? ... -
Page 17: Smartcontrast
Developed for wellbeing, and extend the lifetime of your monitor. Philips LowBlue Mode setting uses a smart software technology to reduce How does it work? harmful shortwave blue light. -
Page 18: Adaptive Sync
3. Image Optimization • AMD Radeon R7 260X 3.3 Adaptive Sync • AMD Radeon R7 260 • Processor A-Series Desktop and Mobility APUs Adaptive Sync • AMD A10-7890K • AMD A10-7870K PC gaming has long been an imperfect • AMD A10-7850K experience because GPUs and monitors •... -
Page 19: Designs To Prevent Computer Vision Syndrome (Cvs)
• Reposition your screen to computer vision appropriate height and angle syndrome (CVS) according to your height. 4. Choose Philips monitor for easy-on- eyes. Philips monitor is designed to prevent eye strain caused by prolonged • Anti-glare screen: Anti-glare computer use. -
Page 20: Powersensor
5. PowerSensor™ detection signal for distances up to 5. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the monitor, step up of transmission and reception of... - Page 21 5. PowerSensor™ it will automatically turn ON if monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength.
-
Page 22: Technical Specifications
6. Technical Specifications 6. Technical Specifications Picture/Display Display Panel Type Backlight W-LED system Panel Size 34" W (86.36 cm) Aspect Ratio 21:9 Pixel Pitch 0.309 x 0.309 mm Contrast ratio(typical) 3000:1 Optimum Resolution 2560x1080@60Hz Viewing Angle 178° (H) / 178° (V) @ C/R > 10 (Typ.) Picture Enhancement SmartImage Display Colors... - Page 23 6. Technical Specifications Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 37.0 W (typ.) 37.1 W (typ.) 37.2 W (typ.) Sleep (Standby mode) <0.3 W(typ.) <0.3 W(typ.) <0.3 W(typ.) Off mode...
- Page 24 Finish Texture Note EPEAT rating is valid only where Philips registers the product. Please visit www. epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 25: Resolution & Preset Modes
6. Technical Specifications Note 6.1 Resolution & Preset Modes Please notice that your monitor works best at native resolution of 2560x1080 Maximum Resolution @ 60Hz. For best display quality, please 2560x1080 @ 75 Hz (digital input) follow this resolution recommendation. Recommended Resolution 2560x1080 @ 60 Hz (digital input) H. -
Page 26: Power Management
7. Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 27: Customer Care And Warranty
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing... - Page 28 Black Dot Defects the warranty period, a TFT Display panel Black dot defects appear as pixels or in a Philips flat panel display must have sub pixels that are always dark or 'off'. pixel or sub pixel defects exceeding the That is, a dark dot is a sub-pixel that tolerances listed in the following tables.
- Page 29 8. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
-
Page 30: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 31: Troubleshooting & Faqs
• Disconnect the monitor from mains solutions, contact Philips customer power source immediately for safety service representative. • Contact with Philips customer Common Problems service representative immediately. No Picture (Power LED not lit) Imaging Problems • Make sure the power cord is... -
Page 32: General Faqs
Service contact information listed set at 2560x1080 @ 60 Hz. in Regulation & Service Information • Shut down your computer, Manual and contact Philips customer disconnect your old display and service representative. reconnect your Philips LCD display. * Functionality different according to display. - Page 33 6504K. ethyl alcohol, ethanol, acetone, hexane, etc. Can I connect my LCD display to any PC, workstation or Mac? Ans.: Yes. All Philips LCD displays are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter...
- Page 34 2560x1080 Philips sales representative for @ 60 Hz. For best display, please more information. use this resolution. Q10: Are Philips LCD displays Plug- Q13: How to unlock/lock my hot key? and- Play? Ans.: To lock the OSD, press and hold Ans.: Yes, the monitors are Plug-and-...
-
Page 35: Multiview Faqs
9. Troubleshooting & FAQs 9.3 Multiview FAQs How to listen to Audio, independent of video? Ans.: Normally the audio source is linked to the main picture source. If you want to change audio- source input (for example: listen to your MP3 player independently regardless of the video source input), you can press to enter... - Page 36 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.