Multiclient Integrated Kvm - Philips 24B1U5301H User Manual

2.4 MultiClient Integrated KVM

What is it?
1
With MultiClient Integrated KVM
switch, you can control two separate
PCs with one monitor-keyboard-mouse
set up.
How to enable MultiClient Integrated
2
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the
OSD menu setting.
Use USBC and HDMI or DP as input,
then use USB C as USB upstream
Please follow the steps for the settings.
1. Connect the USB upstream
cables from your dual devices to
the"USBC1" and "USBC2" port of this
monitor at the same time.
Source
HDMI or DP
USBC1
2. Connect peripherals to the USB
downstream port of this monitor.
USB Upstream
USB C2
USB C1
1
USBC2
PC1
3. Enter to OSD menu. Go to KVM
layer and select "Auto", "USB C1"
or "USB C2" to switch the control
of peripherals from one device to
another. Simply repeat this step for
switching the control system using
one set of peripheral.



 
 

Use DP and HDMI as input then use USB
C as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your duel devices to the
"USB C1" and "USB C2" port of this
monitor at the same time.
PC1: USB C2 as upstream and HDMI
or DP cable for both video and audio
transfer.
PC2: USB C1 as upstream (USB C-A) and
DP or HDMI for both video and audio
transfer.
Source
HDMI or DP
DP or HDMI
14
PC1/PC2
2
USB
  
    
  
USB Upstream
USB C2
USB C1
1
USBC1
PC2